RMU Butterknife SR126 Skis 2025

sku# 257010

Model Info

Select Size (cm):

Please select a size

Size Chart

Qty:

Product Info

Shop all RMU

Optimized for float and playfulness in low angle pow, the RMU Butterknife SR126 Skis are designed to be skied short (RMU only presses one size, 176) and the asymmetrical shape makes pivoting, smearing, and of course buttering a breeze. A perfect choice for that dream trip to Japan, or days when the upper mountain is closed because of instability but the goods are waiting.

Product Details

Rocker Type

460mm Tip Rocker / Camber / 150mm Tail Rocker

Shape

Powder-Specific Asymmetric Shape

Core

Poplar Wood Core With Beech Mounting Plate

Laminates

26 Oz Pre Preg Heavy Duty Triax Fiberglass

ABS Tip and Tail Spacer

Full Wrap Rubber VDS For Superior Dampening

Nylon Top Sheet

Two Sheets Thin Felt to Increase Adhesion Between Unlike Materials

Sidewalls

Extra Thick 8.5mm ABS Sidewall

Base

Okulen 7150 C Graphite Race Base

Edges

Extra Thick 2.3mm Steel Edges

Additional Features

Built with 100% Renewable Energy

Made in Sweden

Binding Compatibility

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Specs

Terrain: Big Mountain, Powder More

Terrain

Big Mountain Big mountain skis are designed for charging big lines with high speeds and big airs. These skis varry in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer side, often with more rocker in the tip and less in the tail. Powder These skis are for the deep days. If you like to find powder stashes at your local resort, go on backcountry missions for the freshest of fresh or heli ski trips to BC, powder skis are what you need to stay afloat. Skis in the powder category are wide and most often have some form of rocker or early rise plus a relatively soft flex. Many powder skis today are versatile enough to handle mixed conditions and harder snow.
Skis: No Bindings
Ability Level: Intermediate-Advanced More

Ability Level

Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
Rocker Type: Rocker/Camber/Rocker More

Rocker Type

Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
Turning Radius: Medium More

Turning Radius

Medium 17-22 m radius is best for all-mountain and park & pipe.
Core/Laminates: Wood
Tail Type: Partial Twin Tip More

Tail Type

Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
Athletes: Wiley Miller
Made in the USA: Yes
Warranty: Limited Lifetime