Lib Tech UFO 95 Skis 2025
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
A hard snow-focused freestyle stick with plenty of snap, crackle and pop and a jib-friendly blunt tip and tail, the Lib Tech UFO 95 Skis get the nod from the park and pipe crew at Lib and plenty of other places, too.
Product Details
Rocker Type
Freestyle/Freeride Contour – Rocker at both ends and camber in the center
Flex
Flex Rating (1 Soft - 10 Stiff) – 171 = 5.5, 178 = 6, 185 = 6.5
Core
Sustainably Harvested Wood Core
Laminates
Triax and Biax Fiberglass
Sidewalls
Sintered UHMW Sidewalls
Base
Sintered UHMW Base
Edges
Magna Traction™ Edges – The edge curves like a steak knife for effortless edge hold, can be detuned for urban and park use and still hold on firm snow.
Graphics
Art by Ben Lardy (@benlardy)
Additional Features
Bio Beans Topsheet – This plant oil based top material is tough, lightweight, damp, snow shedding, and prints amazingly well with Mervin's eco sublimation process.
Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
Park & Pipe, All-Mountain
More
Terrain
Park & Pipe Park and pipe skis, often called freestyle skis, are for skiers who spend the majority of their time on jumps, rails, and jibs of all kinds. Traditionally park and pipe skis have narrower waists with full camber profiles, but this category is incorporating more rocker patterns and different shapes. You will almost always find these skis with twin tips as well as other park specific features like thicker, more durable edges, dense extruded bases, and butter zones. All-Mountain All-mountain skis are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain. If you’re only going to own one ski to do it all, this is what you want. All-mountain skis generally have what we call mid-fat waists that range from 80-110 mm.
- Skis: No Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Medium
More
Turning Radius
Medium 17-22 m radius is best for all-mountain and park & pipe.
- Core/Laminates: Wood
-
Tail Type:
Full Twin Tip
More
Tail Type
Full Twin Tip Desinged to allow you to ski backwards, full twin tips are found primarily on park & pipe skis and freestyle powder skis. More and more, we are seeing twin tips on all-mountain skis of all abilities, as it makes it a little easier to get around, and for the most part does not inhibit forward skiing.
- Athletes: Lucas Wachs
-
Made in the USA:
Yes
- Warranty: 1 Year
| Size (cm) | 171 | 178 | 185 |
|---|---|---|---|
| Tip Width (mm) | 124 | 124 | 124 |
| Waist Width (mm) | 95 | 95 | 95 |
| Tail Width (mm) | 114 | 116 | 118 |
| Turning Radius (m) | 17 | 17 | 17 |