Atomic Backland 101 W Skis - Women's 2025
Model Info
MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Light enough for extended days in the high alpine, composed enough to handle a huge variety of snow conditions, and right on the "money" for the most versatile waist width, the Atomic Backland 101 W Skis are a new model focusing on lower impact construction and backcountry versatility. Utilizing the proven HRZN 3D shape and an Ultra Light Woodcore, the 101 gets it done going both uphill and down.
Product Details
Rocker Type
Powder Rocker – 20% Tip Rocker / 65% Camber / 15% Tail Rocker
Shape
HRZN 3D Backland Tip – Backland’s lightweight HRZN 3D uses a thin, perforated material to create a ski with low swing weight.
Core
Ultra Light Woodcore – Light Poplar and Caruba woods
Laminates
Hardwood Binding Reinforcement
Reduced Fiberglass and Resin – Life Cycle Assessment analysis showed Fiberglass and Resin contributed disproportionately to the skis carbon footprint; more wood and less fiberglass, resin and metal reduces carbon dioxide equivalent emissions by 26%
Topsheet with More Recycled Material
Sidewalls
Dura Cap Sidewall – Vertical underfoot with cap at the tips and tails
Base
Atomic Base – High-density sintered bases that are fast in a variety of snow conditions and accept wax readily.
Edges
Side Edge Angle – 3˚
Base Edge Angle – 1˚
Binding Compatibility
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Specs
-
Terrain:
Alpine Touring
More
Terrain
Alpine Touring Also known as backcountry skis, alpine touring (AT) skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins. AT skis vary in width and weight, with the wider heavier versions usually used for winter/deep snow touring and the skinnier, lighter skis usually used for spring/summer/long distance touring.
- Skis: No Bindings
-
Ability Level:
Intermediate-Advanced
More
Ability Level
Intermediate-Advanced Whether you’re a progressing intermediate exploring new runs and terrain, or an accomplished rider seeking new thrills, the majority of skiers and snowboarders fall into this level. Intermediate to advanced skis and snowboards may be somewhat wider or stiffer than beginner-intermediate skis and snowboards, usually with a stronger wood core and sandwich sidewall construction. Intermediate to advanced boots and bindings range from softer flexing freestyle options to stiffer choices built for stability at speed.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier.
-
Turning Radius:
Medium
More
Turning Radius
Medium 17-22 m radius is best for all-mountain and park & pipe.
- Core/Laminates: Wood
-
Tail Type:
Partial Twin Tip
More
Tail Type
Partial Twin Tip Partial twin tip skis have a tail that is turned up, but not as much as the tip. This gives you the ability to ski backwards and back out of tight spaces, but these skis are mainly designed to ski forward.
- Series: Backland
- Warranty: 2 Years
| Size (cm) | 156 | 164 | 172 |
|---|---|---|---|
| Tip Width (mm) | 125 | 127 | 129 |
| Waist Width (mm) | 100.5 | 101 | 101.5 |
| Tail Width (mm) | 115.5 | 117.5 | 119.5 |
| Turning Radius (m) | 16 | 17 | 18 |
| Indiv. Ski Weight (g) | 1260 |